BLACKBOX DA 250 A € 530 PIU IVA

BLACK BOX DA 1000 AMP CON FLEXICLAMP € 850 PIU IVA

Made with microprocessor technology, the three-phase Energy Measurement unit in versions for DIN guide or panel, or for portbale version for technician, allows the operators to monitor and make adjustments to three phase electrical systems with unbalanced loads in production plants, foundries, mechanical workshops or on single automatic machines, to optimize electricity consumption and avoid waste. 

The version available display 14 pages of data, comprising a total of 46 parameter controls. Used with the pre-set data setting, the unit offers total monitoring detail.

The mediaelettra power analyzer in portable version is electric energy analyzer. In fact, inside the case, type 24 hours you can find the analyzer, three amperometric clamp meters Studied for a mobile duty,  is useful to do the measure campaigns on the three-phase electric plants with unbalanced loads. There's no need of any fixed installation. You can leave the analyzer and observe all the parameters of a plant in required time, simply by supplying the instrument to the 230 VAC net and further on by connecting the amperometric clamp meters and the voltmetric terminal. Our analyzer is produced in various versions that correspond to the user requirements. It can have all the optional function of an analyzer installed and it has got the possibility of the connection to PC and the observed data processing.

TECHNICAL CHARACTERISTICS

Input: Voltmeter L1-N, L2-N, L3-N - max 400V RMS - 50Hz, 60Hz, 400 Hz
Input: Amperometer 0-5A RMS - 50Hz, 60Hz, 400 Hz
Overload: Voltmeter 1000V RMS - max for 1 s.
Overload: Amperometer 20A RMS - max for 1 s.
Feeding: 230VAC ± 10% 50/60 Hz
Automatic scales change: 3 tensions, 4 current
Measurements displayed in true RMS value
Measuring method: digital sampling
Sampling frequency: 4800 Hz
Automatic offset compensation: Every second
Accuracy: Tension, Current, Active reactive and apparent power: 1% full scale
P.F.: ± 0,02 unit
Frequency: 0,5% of reading

DATA STORAGE
RAM memory module: 32kb
SET-UP values of the analyzer are stored on EEPROM
OPERATING CONDITIONS
Temperature: from -10°C to +50°C
Relative humidity range: from 20% to 80%
Reference standard: IEC 348, VDE 41

Value displayed:

Volt, Amp, P.F.
KW, Hz,
T.H.D.
KVAr, KVA
KVArh, KWh
KVAr +/-
KVA peak
KW peak
Temperature C1-C2
hh - mm - ss
dd - mm - yy